A friend of mine has just started her own blog and I remembered I used to have one of those - so I had a look - I hadn't realised that it was so long since I had done anything on it, just been too busy I suppose. Discipline in something like this I just don't have and it has been a couple of busy years in other areas of general life. I have however continued to craft - I still don't think I have found a style yet, I just love to experiment and try new techniques. I have been better at posting on to my pinterest board and I notice that some of the things are showing on the sidebar of the blog post.
So I think a review is probably the best thing I can do to get myself going and hopefully start to get back on track with this blogging malarkey.
I think the facebook page that I suggested the Heighley Gate crafters have), so that we don't have to try and remember what we're supposed to be doing and bring the whole crafty stash with us every time) has been reasonably successful - members are becoming less shy about posting their makes which is really good; competitions that we spot can be posted up; events that we see can also be advertised on there so that we don't miss out. It's just such a shame that the craft franchise there isn't as good as it used to be and caters more for children than serious crafters. On the up side, a really good craft shop called the Craft Hive has started in Bedlington and run excellent classes for all sort of classes from beginners crochet and sewing to upcycling old furniture.
My latest experiments have involved the faux leather technique and bookfolding I'm really pleased with the results.
My cat Stella is having a good howl at me, so I'll say goodbye for now and hopefully catch up again soon
Love
Les
Hi there
I know it's long time, no see, but I just don't know where the time has gone! My computer has also been down which hasn't helped. Now I'm having to do so much catch up on it, that I haven't had a chance to catch up on the crafty stuff grrrr.
Anyway - I just thought that I'd point you in the direction of a couple of really good blogs that I've been following:
Here's the first, one of favourite stampers, no that's the wrong word, artist most aptly describes Barbara Gray and she is also an excellent communicator and teacher.
If you like a challenge, you'll also find links to her monthly challenge on her blog. Personally, I'm not sure I would dare post any of my efforts up there, but there's plenty of inspiration if you need it.
Then there is Margie at +MargiesBlueHouse who was talented enough to win a couple of crafty weekends recently (lucky lady) and has posted some excellent ideas and projects on her blog. I'm hoping she'll be sharing some of her new found skills at the craft group tomorrow! Here's her latest example - I would also recommend you take a little time to have a look at the things she does with old paperback books, fabulous.
Well take some time and explore - I've got to get back to doing some of my own stuff so that I can post here properly!
Love
Les
http://barbaragrayblog.blogspot.co.uk/2013/11/its-friday-it-s-giveaway-and-its-time.html
Hi there
3 weeks since my last post and I have been so busy. We had a log burner installed in our living room so since that was done, we have had to complete redecorate it. We weren't sure what to do about the fire surround - whether just to install a mantelpiece or get a complete fire surround. So I decided to try a bit of clarty crafting and see what would happen and here is the result.
 |
Fired up fossils
|
I thought as the hearth was made from slate which often contains fossils and as I had received a fossil stamp from +Clarity Stamp as part of their design club, it would make a good theme. I also had a fern stencil obtained from +the stencil library some years ago which completes the design.
I used a match pot in black to create the outline within the main part of the wall to make a faux fireplace and used the colour I have on the other three walls for the background colour of the insert. To stamp and stencil I used adirondack Espresso stamping ink. A word of warning though - if you make a mistake it takes several coats to put right!! I hope you like the overall effect though.
PS. Arada Stoves who make the villager esprit woodburner that we had installed has also put a picture on their face book page - how exciting is that!!
Hmmm +Sheena Douglass has some amazing stamps out right now on +Create and Craft and I can really see that Koi on my bathroom walls....
Stay well
Love
Lesley
I have only just started with the Inkadinkadoo stamping system and so far only have one part - the circle cog starter set, but what a revelation. I don't know who it's best for... the +gentleman crafter is an expert and very inspiring, but don't let that put any new stampers off. In fact the stamping gear is excellent for those who don't have much confidence. You don't have to do geometric patterns, but the inkadinkadoo stamps tend to lead you in that direction. In the first picture here you can see the circle 'cog' and the stamp paddle at the side. The paddle you can just see has points at the top and bottom; these fit neatly into the grooves around the edge of the cog to help space your pattern building properly. Here are a couple of examples of my 'playtime'.
 |
Anyway is up
|
In this first one I opened out a DL card, chose an inkadinkadoo stamp that I liked then centred the cog onto the card so that it went over the fold. I thought the corners looked a bit bare and because the 'cog' has compass points on it I was able to line up a quarter of the cog in the corner and put a pattern there too. The inkpad I used was a 'big and juicy' in spice colours to add some interest (which I don't think you can get anymore which is a real shame, but you can get other multi colour pads). What I found by doing my design all over and geometrically is that you can use the card anyway up you want. You have two options in the vertical aspect and two in the horizontal plane (sounds posh for up and sideways! :-) ).
 |
Partidges
|
This second one is a little more adventurous and I have used not only the inkadinkadoo stamps, but also I have found that the depth of +Clarity stamps means that they also work well on the inkadinkadoo paddle. I was able to stamp a design around the cog and because I used every other groove for spacing, it left a gap big enough to put in my small partridge. With a couple of spellbinder shapes I was able to make a centrepiece and stamped that with the large clarity Partridge, before matting and layering the whole shebang.
I know I have a lot more experimenting to do with this new tool. I'll be buying the circle wheel next as that allows you to design within the wheel as well as even larger designs than you can do with the cog. I've also got an idea about what I'll be hoping Santa leaves in my Christmas stocking....
Lesley X
Hello there
Well it's been a while since I did any posting (I really must learn some discipline for this!). At the last craft and coffee at Heighley gate, we made small photobooks out of dishwasher tablet boxes. I was quite pleased with mine, but if you want to see what you can really do with them, I recommend that you go to , +Margie. When I've decided what I'm going to put in mine, I'll post it on here. Our 'mingle' (it's a kind of challenge, but we exchange what we've made) for last Sunday was an anything goes with a bees, butterflies or insects theme. I decided to go with butterflies and made a set of fridge magnets. I hope you like them.
 |
| Butterfly Trio |
First of all I used my butterfly spellbinder dies and cut one of each size into sticky backed magnetic sheets; I did the same with some card. Before sticking the card to the magnetic sheet (I learnt the hard way!) I coloured the biggest one in using Promarkers and Spectrum Noir pens in a freehand design. Once coloured I thought that the central section was a bit bland. To overcome this, I hunted out a Spellbinder Christmas bauble die cut and used it as a stencil to make sure that the design on both sides was the same. After that I lightly tipped around the edge and the cut out sections with gold gilding wax; folded the design in half and did the same along the centre of the body. Once the colouring was done, I stamped all over with a clear Versamark pad and heat embossed with clear powder. This intensified all of the colours and protected the surface. For the antennae I found some gold wire (taken from a very fancy bottle of wine we were given at Christmas) and curled the ends. I took the backing from the magnetic sheet and stuck the wires in place before carefully matching up the paper die cut to the magnetic one. I finished off with some strategically placed 'jewels'.
The middle butterfly is done in the same way, but the pattern is a stamp from +claritystamp design club (It's a cat but you wouldn't know it); again I coloured in with alcohol pens; tipped with gold gilding wax and heat embossed before mounting the card onto the magnetic die cut. and putting some gems on. The tiny one is self coloured with gilding wax before being heat embossed.
Stay well and enjoy your crafting
Lesley X
Well - if you've stumbled across this in the hope of innovation, you'll already be thinking 'what a mistake'! For those who haven't heat embossed before, let me have the privilege to introduce you to the magic. Heat embossing is used in this example to add another dimension - to try and give the impression that the birdcage is slightly raised from the page This is done by stamping your image in a clear or coloured ink and then covering with embossing powder - shake off the excess and use a heat tool to melt the powder onto the image.
 |
Be the change
|
To start with I took some Clarity paper and with a piece of bubblewrap dipped into a clear Versamark inkpad, dabbed all over the paper. Because Versamark acts as a resist, when I brayered pale blue ink(Adirondack Stonewashed), followed by dark blue ink (Adirondack Denim) up the edges, the spots put on in versamark didn't take the colour so much.
I then used a Sheena Douglass' swirl (from her 'little bit sketchy' range), top and bottom in denim blue ink. Back to the versamark (clear) and did some more stamping with the same swirl, but this time I added clear embossing powder and heated it, I followed this with the birdcage in the same way. Before both of these had cooled down though, I took some frosted diamond mica powder and brushed that over the top to get the sheen. To finish off I used the heat embossing technique on another Clarity stamp from their design club range (be the change...) and as butterflies are so synonymous with change (and because I thought a splash of vibrant colour would help), I added a Papermania butterfly too.
In this example I didn't want colour coming through which is why I used a clear versamark, I would also use this if I was using a metallic finish embossing powder - although you could use any colour you wanted as metallic powder covers completely. However, if I want something to tone in with the rest of my project, I would use either a dye based or pigment based coloured ink and stamp my image in that, following up with a clear embossing powder.
The magic? Well that is watching what really looks to be a quite dull powder turn into something quite special when you heat it up. Black turns glossy; gold, silver and copper get an expensive shine and everything just looks somehow, more finished.
The other thing that heat embossing is very useful for is when you want to colour your image in, but don't want your colours to get muddy from the outline ink. Also because the colouring medium doesn't stick to the embossing, your lines remain crisp on the image.
Finally a tip for detailed images particularly, pre dust your paper with either talc or an anti static bag, that way you greatly reduce the number of stray particles being heated (you'll never get them off).
Hope you're not yawning too much - you'll certainly not be yawning if you try this!
Les X
Mica powders are another medium that I really enjoy working with. I find that they are very versatile and can be used wet or dry; in fact you can 'paint' with them in their dry state. They have their own binding medium in them, so you can cover them with a thin clear acetate to protect your work when it's finished and given a little time it will stick to the powder. I used mica on the venetian masks in the previous blog, but I thought I would post another example.
This one uses a similar technique to the masks cards, again it's based on a Barbara Grey with a few of my own additions. Using double sided sticky acetate, peel back one side of the wax paper and place your stamp down (the house); replace the wax paper. On this one, I turned the piece over and worked on the reverse - you can work on the same side, but I wanted to stamp the birds and foliage on the foreground. Using a very sharp craft knife (but not pressing too hard - you don't want to cut through the sticky layer), score your hills, trees and path in place. You can use a punch for the moon - I used whatever to came to hand that was the size I wanted! You then need to cut around ALL of the bits of the cottage - window frames, door handle, chimney - the lot. It IS fiddly.
 |
| Quirky Cottage |
Pick out your first piece of wax paper on the house, I find it easier to start on the smallest pieces first, remember that once a piece of the sticky is coated with mica, nothing else will stick to it. I used an old paint brush to apply the mica, you need the tiniest bit at a time - tap it on brush it off. After the house was done, I moved on to the path and the grass. To get the shades you can mix the mica powders, a touch of white into the green gave me the lighter shade.
You can then move on to the sun (or moon) before doing the rest of the sky. When it comes to the sky, dab a few small bits of white onto the sticky and sweep it across before you go in with the blue. Finally the trees; remove the wax paper from the trunks and dust with your preferred colour. then you can remove the foliage cover. You can use mica, but for this I selected some gilding flakes - normally I would put a pinch of them on and scrub off, but this time I was selective and picked a few good sized leaves to get the effect I wanted. Give the piece a gentle buff to give it a lovely sheen.
To finish off I layered it onto another double sided sticky sheet, (but you have to watch for air bubbles) and was then able to stick it directly onto my backing card. White or a pale colour is best, black can make it look gloomy. I then removed the front piece of wax paper from the work and stamped the birds and foreground foliage before covering with acetate - again being careful to avoid air bubbles.
If you do all of the work from the front, you will still have a sticky back and although covered with powder on the front, you will not need any more adhesive for a thin acetate to cover your work and protect it and there is less chance of air bubbles being trapped.
This is great for making fridge magnets, stick the whole lot straight onto white card and then glue it to the magnetic sheet.
